Make your own PARABOcCLE!

Choose a head size (Small, Medium and Large) and decide a head type (eye opening head or solid eyes head)


Pick a head size

Choose a head size out of three sizes, which are L-BOcCLE, M-BOcCLE, and S-BOcCLE. Each size comes with both an eye opening head and a sold eyes head.

  • PARABOcCLE 遊び方
    L-BOcCLE heads
  • PARABOcCLE 遊び方
    L-BOcCLE heads and bodies
  • PARABOcCLE 遊び方
    Applied decals and doll eyes
  • PARABOcCLE 遊び方
    Applied clothes, shoes, and wig

How to switch PARABOcCLE heads
youtube

  • PARABOcCLE 遊び方

    First detach the default head.
    Unscrew the screw located on the back of the head using a Phillips driver
    The picture shows solid eyes head.

  • PARABOcCLE 遊び方

    Eye opening head is on the left and solid eyes head is on the right.
    Set the neck on the opening of the front head part

  • PARABOcCLE 遊び方

    For eye opening head, apply eye plate with eyes before setting the neck on the opening of the front head part and put the back part on and screw it.

How to attach eyes to PARABOcCLE head
youtube

  • PARABOcCLE 遊び方

    L-BOcCLE head takes 10mm eyes
    M-BOcCLE head takes 8mm eyes
    S-BOcCLE head takes 6mm eyes

  • PARABOcCLE 遊び方

    PARABOcCLE set comes with solid eyes head attached when you receive. If you are interested in using eye opening head, you need to remove the solid eyes head from the body.

    Eye plate for Realistic eyes (left) Eye plate for Anime eyes(right)

  • PARABOcCLE 遊び方

    Stick double sided tape on the plate and then set eyes on them.

  • PARABOcCLE 遊び方

    For Realistic eyes, separate the front part and the back part of eyes using a cutter knife if needed. You can change the direction of eyes using the center dip of the plate.

  • PARABOcCLE 遊び方

    For Anime eyes, use the eye plate with no dips. Set the eyes to be seen fully on head.

  • PARABOcCLE 遊び方

    The head moves forward/backward or right/left due to how you set it.(the neck moves right/left, always. )

  • PARABOcCLE 遊び方

    When the tip is set as not showing the hole, the neck moves forward/backwards.

  • PARABOcCLE 遊び方

    When the tip is set as showing the hole, the neck tilts right/left.

◎Please note that the neck part (red circled in above pictures) may break with forced pressure to the wrong direction.

Taking apart of PARABOcCLE body
youtube

  • PARABOcCLE 遊び方

    For exchanging trunk parts, separate the front and back of the trunk using the tip of cutter.

  • PARABOcCLE 遊び方

    Photo shows all the parts dissembled
    Arms and legs don't separate any more.

  • PARABOcCLE 遊び方

    ◎Please note that the red circled joints in above picture may break with forced pressure to the wrong direction.
    Please be very careful.

How to use washers
youtube

  • パラボックル 遊び方

    If neck, shoulder joint or leg get loose, washers that come with body might be a help. Washer is 0.3mm thick.

  • パラボックル 遊び方

    Take the body apart and apply washer to arm or neck joint as the picture shows.

  • パラボックル 遊び方

    Put the parts back together. You will see joints are tighter with washwer applied. You can tighten legs the same way.

How to use a soft vinyl head with PARABOcCLE
youtube

  • PARABOcCLE 遊び方

    You can use some of Parabox soft vinyl heads with PARABOcCLE body using the neck part for soft vinyl heads (sold separately)

  • PARABOcCLE 遊び方

    Open up the trunk part and set the neck part for soft vinyl heads.
    Apply a soft vinly head. If it's too tight, warm up head to soften soft vinyl skin or cut up the neck opening a little bigger.

  • PARABOcCLE 遊び方

    You can use Parabox S-Angela, Momo, Animal heads, Petite Fairy and Hikari with PARABOcCLE body.

How to apply Parabox decals
youtube

  • PARABOcCLE 遊び方


    Parabox offers eyes, eyeblows, and mouth decals.

  • PARABOcCLE 遊び方

    Cut one of each for your preference.
    Right after soaking in water, decal film will be separated from backing.

  • PARABOcCLE 遊び方

    Slide the decal off the paper in order to place it on the appropriate eye position.
    Use your finger or toothpick to shift it for adjustment. If decal film gets dry, add some water for smooth movement. When it is in the right position, use a Q-tip to absorb excess water.

    When eyes are set in the right postion, remove moisture using cotton swab.

    When they are all dry, you might want to spray top coat over decals from 30cm away, in order to protect decals, and make decals have a natural look.

How to face-up PARABOcCLE head

  • PARABOcCLE 遊び方

    Try simple face-up on PARABOcCLE head using brown and darkbrown acrylic paints for eyebrows and eyelines, and pink pastel for cheek and lips!

  • PARABOcCLE 遊び方

    Dilute brown paint with water to draw draft for eyelines and eyebrows and layer lines to thicken lines.
    Use darker brown for eyelashes.
    Apply pastel color on cheek and lips to complete.
    youtube

  • PARABOcCLE 遊び方

    If you are good at drawing Manga illustration, you would love to try face-up painting.
    It will be fun!
    youtube

How to apply wig to head
youtube

  • PARABOcCLE 遊び方

    When face-up is done, next is applying a wig to PARABOcCLE head.
    Attach a thin film tape on top of the head. This film will keep the wig on the head.

  • PARABOcCLE 遊び方

    Turn the wig inside out and and see which part of the wig goes to front. Press that portion of the wig to the front of the crown of the head, and reverse it back over the head.

  • PARABOcCLE 遊び方

    Adjust the wig to complete